I can build anything you want. Below are a few examples of some of the custom one off pieces I have made.
These are some custom bar stools I made to the customer’s specifications to fit their kitchen island.
Table was made for a custom tank built to hold a tortoise.
I built this custom sized coffee table for a customer who wanted to put a top on it he already had.
I repaired this RV gate that was hit by a truck. and moved it up 1-1/2” so it could clear the new pavers underneath without rubbing.
This is a Bronco I removed the 4X4 parts on the front end and made it two wheel drive. The beams are built for a 6” lift. I widened the beams 3” per side to give the front end a 6” wider stance for better stability off road. I also had to modify the steering linkage to accommodate the new beams. The center pivot bushings were replaced with a 3/4” uni-ball for strength a performance.
This trailer latch broke and I replaced it with a thicker one so it would last longer.
Customer supplied me with the rack and precut material and I welded it together for him and made attachment brackets. the aluminum tubing was .025” thick.
Landscape trailer that needed a new floor in the front section. The customer had a problem with theft so I came up with a locking system for the front cabinet area on the trailer.
Some miscellaneous aluminum welding. I make custom aluminum tanks and intakes.
Customer wanted a plate welded to the bottom of their gas tank for a cleaner look.
